62018 Electronic Temperature Control Device

62018 Electronic Temperature Control Device

Our panel type temperature control device that we manufactured for industrial applications has many features in addition to simply measuring the temperature.

Features :

Measures the temperature. You can control the output according to temperature.
Measures the humidity. You can control the output according to humidity.
You can associate the temperature and the humidity with each other and you can control the output accordingly.
It has 2 floating connections;
With the contact of your choice, you may control;

  • aa) Temperature,

  • ab) Humidity,

  • ac) Time,

  • ad) Temperature + humidity,

  • Operates on 220V AC.
    You can adjust the temperature between 0-1000 ⁰C and you can store it to memory.
    It displays the current time.
    You can see the upper and lower limits for safety.
    Works on the basis of switch on / switch off.
    It begins its operation at the time you want and works for the duration that you set. Then it shuts down automatically.
    You can lock the keys in order to prevent unauthorized access.
    You can decrease the temperature by half simply by standby mode.

    Dimensions :

    Code Width Height Length
    62018 48 mm. 48 mm. 82 mm.

    Industrial Purposes :

    pdf Instruction Manual

    In order to benefit the most from the heaters that we manufacture, we had to develop our own temperature control devices.

    Therefore, we developed the temperature control devices according to the specific requirements of every work, from small to big.

    Joint characteristics of our temperature control devices;

    A) The electric feed is on made on the device.

    B) They control the temperature with 1 ⁰C degree of precision.

    C) Because we programmed them with PIC, we can run the systems in a certain logic.

    D) For the temperature measurement under 100 ⁰C , because of the characteristics of the sensor we use, we use shielded sensor wiring between the device and the point of measurement.

    E) Some our products are manufactured with the variants, running with K type thermocouples for the temperature control requirements of 100C or above..

    F) As the result of the use of semi conductors, you can make millions of switch on-off without the risk of short circuit.

    G) The sytems consist of a wide array of devices that can answer to any need.

    H) It can measure the temperatures of different points and evaluate the data according to a certain logic.

    I) A lower minimum and upper maximum temperature limit is programmed to our heating systems for safety reasons.

    J) Any intended temperature is entered as default.

    K) It is possible to change the operation temperature. If desired, you can change the default temperature value too.

    L) In order to prevent interventions, the devices come with a keypad lock.

    M) The specially manufactured devices are made according to the order. They are not covered in this section.

    The explanations, instruction manuals and programming animations are detailed on the side.

    Temperature Control Devices :   Temperature Control Devices :

     61011 E. T. C. Devices
     61012 E. T. C. Devices
     61013 E. T. C. Devices
     61015 E. T. C. Devices
     61016 E. T. C. Devices
     62012 E. T. C. Devices
     62013 E. T. C. Devices
     62014 E. T. C. Devices
     62018 E. T. C. Devices
     62912 E. T. C. Devices
     62913 E. T. C. Devices
     62914 E. T. C. Devices
     63032 E. T. C. Devices
     63033 E. T. C. Devices
     63034 E. T. C. Devices
     63035 E. T. C. Devices
     63932 E. T. C. Devices
     63083 E. T. C. Devices
     63164 E. T. C. Devices
    Copyright (c) 2011 Omak Ltd. Şti.