V3185 Barrel Heater

For More Information...

Previous - Barrel Page - Next

V3185 Barrel Heater

V3185 Barrel Heater

This product is a special barrel heater variant, once again developed by our company for sensitive chemicals. In normal products, the temperature is controlled from a single point and the temperature is thus set accordingly. In this product, there are three separate circuits for each segment of the barrel.

Since the segments, in which the materials are being depleted, require less or no temperature requirement at all,each segment is controlled in a separate manner. Since there will be no requirement for any heating for the freed areas, occurring by the depletion of the material, the temperature around that area shall not rise. In addition to provide a better heat distribution, because of the fact that the areas, where the materials are depleted come online less frequently, the product shall also provide energy saving.

Thanks to the 62032 Electronic temperature control device, you may control the high temperatures, may display the temperature on screen and as you program the device to auto start / shut down, you may also program it to start at any time at any temperature that you program.

This product is used for temperatures up to 100 °C and has high efficiency.

V3185 Barrel Heater Technical Specifications :

Code Width cm. Length cm. Volt AC. Control Device Watt Cartoon Dimensions cm.
V4185 85 182 220 63032 2.000 27 x 27 x90

pdf Instruction Manual

Frequently Asked Questions on Barrel Page

We developed a patented and special product for heating up IBC tanks, barrel and drum heaters that are required in many branch of industry.

Barrel Heater is attached to the drum or tank by a Velcro fastener shaped as a band. The temperature control device on the system keeps the temperature at the desired levels.

As you may see from the table below, we present our flexible Barrel Heater to your attention in six different kinds.

The first and second ones share the same size and dimensions. The main difference is the properties of 61016 and 62012 temperature control devices.

Our third and fourth Barrel Heaters are at a size of a barrel and encompass the barrels completely. In addition, our product with the designation V1185 has a 62012 temperature control system that controls the temperatures below 100 °C. And our product, designated as V2185, has an electronic temperature control device, 62912, which is a more powerful variant and may very well be used for temperatures below 250 °C

Furthermore, in order to protect the barrels and drums, upon request, internal and external we produce insulation jackets for indoors and outdoors. The main difference between indoor and outdoor insulation jackets is the fact that outdoor jackets are manufactured from silicon textiles due endure heavy weather conditions such as snow and rain.

The intended temperature is input to our temperature control devices that we program with PIC as default. In order to prevent a overheat failure, the upper limit of temperature that the client demands is programmed into unit.

The user can re-program the default temperature value within upper limits.

Technical Specifications of the Barrel Heaters :

Code Type Width Length Volt AC. Control Device Watt Cartoon Dimensions
V0182 Barrel Heaters 25 cm. 182 cm. 220 61016 1525 27 x 27 x 27 cm.
V1183 Barrel Heaters 25 cm. 182 cm. 220 62012 1525 27 x 27 x 27 cm.
V1185 Barrel Heaters 85 cm. 182 cm. 220 62012 1.850 27 x 27 x90 cm.
V2185 Barrel Heaters 85 cm. 182 cm. 220 62912 1.850 27 x 27 x90 cm.
V3185 Barrel Heaters 85 cm. 182 cm. 220 63032 2.000 27 x 27 x90 cm.
V4185 Barrel Heaters 85 cm. 182 cm. 220 63932 2.500 27 x 27 x90 cm.
Code Type Gross Weight Cartoon Dimensions
VY001 Insulaition Jacket for Barrel 25.800 gr. 110 x 60 x 40
Copyright (c) 2011 Omak Ltd. Şti.