The insulation jacket is manufactured for preventing the loss of heat to the outer environment since the heater does not have adequate contact with the tank in aluminum frame.
It is comprised of two parts, which encompass the upper, top and side sections of the IBC container thus insulating it from the environment.
The top and side parts feature canopies in order to prevent heat loss.
The product is manufactured from 25 mm ceramic wool, which is a strong insulation material.
The product is interlocked by velcro fasteners.
|IBC Heater||IBC01 IBC Heater||IBC02 IBC Insulation|
IBC Heaters with flexible film system are developed in order to meet the requirements in this area as a national and high quality alternative.
Our flexible heaters that surround the external sides of the tank completely are united with a Velcro fastener at side.
The straps that cross over the tank relieves the overall weight stress of the heater.
The 62012 electronic Control system on The IBC Heater enables the tank to reach to the indented temperatures and keep them still.
By our device, you program the operation durations of the heaters to run in within an intended period of time.
Also our insulation jackets that are manufactured in two types as indoor and outdoor in order to protect the tank against adverse environmental conditions therefore providing ease of reaching the intended temperature and energy saving.
Technical Specifications of the IBC Tank Heater :
|Code||Type||Width||Length||Volt AC.||Control Device||Watt||Wight Kg.||Cartoon Dimensions|
|IBC01||IBC Heaters||100 cm.||440 cm.||220||62012||2.650||10,700||27 x 27 x 110 cm.|
|IBC02||IBC Heaters||30 cm.||80 cm.||220||62012||1.500||3,600||35 x 20 x 100 cm.|
|IBCY1||IBC Insulation Jacket||100 cm.||460 cm.||---||---||---||24,900||40 x 60 x 110 cm.|
|What is an IBC tank ?
Is the temperature control precise ?
|Is an isolation jacket a necessity ?
Is the product under any warranty ?
Is it suitable for any production unit ?