PVC Heat Band

PVC Heat Band

PVC Heat Band

Points to be paid attention while using :

a ) The band should not overlap.
b ) The band should not be bent.
c ) The product is not used as a wind ball.
d) Should not be bent during the application as it should not ov erlap.
e ) Used only for the locations which do not require temperature control and safety.

Kinds of PVC heater bands :

Code Type Width Length Watt
14425 PVC Heat Band 25 mm. 5 mt. 92
14438 PVC Heat Band 25 mm. 10 mt. 200
<< Things to consider for heat bands>>

The Heat Tape is required to prevent the freeze of the communication pipes in winters, to increas the viscosity of the industrial materials with lower viscosity and to prevent the cooling down of various materials.

The quality, technical specifications and the prices of The Heat Bands vary according to the application.

You can contact us if you hesitate to choose between the products.

We strongly recommend to use The Heat Tapes with temperature control just like our all other devices.

We would like to state that implementing heat insulation in heat bands with no temperature control may lead to the uncontrolled increase of the heat and may result to unwanted conditions.

You may choose the devices, which are appropriate to be used with our Heat Tape line, from here.

We recommend, just like our all other devices, the use of temperature control.

Band Heater Types :

PVC Heat Band
Elastomeric Band Heater
Silicon Heat Bands
Polyester Band Heater
Silicon Heat Cable
High Degree Heating Tape
Copyright (c) 2011 Omak Ltd. Şti.